Code:

_/ _/ _/_/ _/_/ _/ _/ _/_/_/ _/ _/ _/_/
_/ _/_/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/
_/ _/ _/ _/ _/ _/ _/ _/_/ _/_/_/ _/ _/ _/_/
_/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/
_/ _/ _/_/ _/ _/ _/ _/ _/ _/ _/_/ _/_/
Adobe After Effects 2025 (v25.0.1) Multilingual
(C)
www.adobe.com
SUPPLiER.......: m0nkrus RELEASE DATE....: 10/25/24
CREATiON.......: m0nkrus RELEASE TYPE....: Full Distr
TESTER.........: m0nkrus PROTECTiON......: Cracked
... RELEASE iNFORMATiON ...
Adobe After Effects 2025 (v25.0.1) Multilingual contains
Chinese std, English, French, German, Italian, Japanese, Korean,
Portuguese, Russian, Spanish, English with Arabic support,
English with Hebrew support, English (Great Britain),
French (Canada), French (Morocco) & Spanish (Mexico) versions
of Adobe After Effects 2025 for 64bit(x64).
... iNSTALL iNFO ...
1.) Install the Adobe After Effects 2025 (use autoplay.exe).
2.) Enjoy!
Note: If you encounter any issues with a previous installation / crack,
please uninstall Adobe After Effects 2025 and delete those folders:
C:\Program Files (x86)\Common Files\Adobe\SLCache
C:\ProgramData\Adobe\SLStore
... GRATiTUDE ...
Pasha_ZZZ from FORUM.RU-BOARD.COM for help in finalizing the crack.
... FOR RUSSiANS ...
ХоÑÑ Ð·Ð°ÑвиÑÑ, ÑÑо ÑÑиÑÐ°Ñ Ð°Ð´Ð¼Ð¸Ð½Ð¸ÑÑÑаÑÐ¸Ñ ÑеÑÑÑÑа NNM-Club
ÐÐÐÐÐÐ
ÐÐÐÐÐÐ
Ð ÐÐСÐÐ ÐÐЦÐÐÐÐÐ!
ÐÑбликаÑÐ¸Ñ Ð½Ð¾Ð²ÑÑ Ñелизов и вÑÑÑеÑкое обÑение Ñ ÑзеÑами
на NNM-Club Ñ Ð¿ÑекÑаÑаÑ. ÐеÑÐµÐ½Ð¾Ñ Ð¼Ð¾Ð¸Ñ ÑбоÑок на ÑÑоÑ
ÑеÑÑÑÑ Ð¿ÑоÑÑ Ð½Ðµ пÑоизводиÑÑ!
РпÑиÑÐ¸Ð½Ð°Ñ Ð¼Ð¾ÐµÐ¹ нелÑбви к Ð´Ð°Ð½Ð½Ð¾Ð¼Ñ ÑеÑÑÑÑÑ Ð¼Ð¾Ð¶ÐµÑе пÑоÑиÑаÑÑ Ð½Ð°
http://www.monkrus.ws/p/nnm-club.html
... CONTACT iNFO ...
Site: WWW.MONKRUS.WS
E-mail: [email protected]
... F A Q ...
Q: I can't click the "Continue" button because the contents of the window do
not fit in the window itself, and the button is out of view. What to do?
A: This occasionally happens on crookedly tuned OS. Use the TAB key. Click it
to the desired menu item.
Q: The installation was terminated with error 24 (Administrator rights are
required for installation). What should I do?
A: For some unknown reason, Windows Defender marks the Set-up.exe file as a
suspicious application for some users and stops it. Interestingly, the file
is not deleted, and the antivirus itself does not issue any messages about
this. At the moment, two solutions to the problem have been identified, and
one works for some people, while the other works for others. The first
solution: disconnect the computer from the Internet during installation. The
second solution: unpack the image onto the hard drive and install the
program from the unpacked file. I hope this problem is temporary and
Defender will calm down soon.
Q: The installation was not completed due to an incomprehensible error. What to
do?
A: Familiarize yourself with the decoding of error codes. Also, I recommend to
study the installation log. https://tinyurl.com/adobeccinstallerlog It is
located at C:\Program Files (x86)\Common Files\Adobe\Installers\Install.log
Perhaps here you will get more detailed information about the problem and
how to fix it.
Q: I have a hang-up at the initial stage of installation, not described above.
Can you suggest something?
A: Try to replace the Set-up.exe file used in the distribution kit with the one
downloaded from: https://tinyurl.com/Fix1MetaTagFix
Q: What's wrong with disabling spy modules?
A: The spyware modules CRLog Transport Application (CRLogTransport.exe) and
Adobe Crash Reporter Service (AdobeCrashReport.exe) have been disabled. The
files that initialize them have been renamed to CRLogTransport.exe.bak and
AdobeCrashReport.exe.bak, respectively. If you suddenly want to restore
their functionality, simply remove the .bak extension from them.
Anticipating the question of some users as to why AdobeIPCBroker.exe is not
blocked, I want to say that some online services will not work without it.
Q: What about medicines for this version of the program?
A: Several files were patched using the uncia & CGP Co method, which I then
integrated into the installer. You do not need to do anything to cure them!
Just in case, the original files are saved with the *.bak extension. To
restore them, remove the .bak extension from these files and replace the
existing patched files with them.
Q: Some time after launching the program, I began to receive a pop-up
notification about the imminent end of the trial period. What to do?
A: The medicine has a built-in mechanism to solve this problem, blocking access
to a number of IP addresses and a number of hosts. Windows Firewall
(Defender) and the hosts file are used for these purposes. Unfortunately,
the block list changes periodically. But we can also dynamically adjust it!
To do this, copy the file ..\Adobe 2025\packages\setup.exe from the
distribution to the Desktop and run it with the Internet enabled. When an
error message appears, just click OK. After a few seconds, the block list
will be updated, and the pop-up notification will stop bothering you. If
this does not happen, then either you are using a third-party firewall, and
it ignores the connection rules specified in Windows Firewall, or some
software installed on you blocks changes to the hosts file, or the hosts
file is ignored by the system, since your programs access the network
through a proxy or VPN. In the first case, I recommend blocking network
access for the main executable file AfterFX.exe, the launch of which
initiates the appearance of the ill-fated notification. In the second case,
check whether the hosts file has the "Read Only" attribute and whether your
antivirus blocks changes to this file. In the third case, all hope is only
for the rule in the firewall; if you use a third-party firewall, then the
recommendations are the same as for the first case, and if not, check for
the presence of the "Adobe Unlicensed Pop-up" rule for outgoing connections
in Windows Firewall - it should be there. I have included AfterFXFix.cmd to
block the connection in Windows Firewall simply Run as an Administrator.
Q: When I run the program, it closes with error 0xc0000142! What's wrong?
A: Starting with version 24.1, this program requires your processor to support
Advanced Vector Extensions 2 (AVX2) instructions. If the processor does not
support this technology, then the program will not start, producing the same
error. I recommend "rolling back" to a version of the program younger than
24.1.
Q: When I open the program, I get the error "Adobe Creative Cloud, needed to
resolve the problem, is missing or damaged...". What to do?
A: You still have "tails" in your system from previous installations of Adobe
Creative Cloud components. They must be removed. To do this, use the Adobe
Creative Cloud Cleaner Tool . As the component to be removed, select All
first, and then Adobe Creative Cloud Desktop. After that, reinstall the
failed program. Such cleaning with reinstallation will not damage
previously installed programs.
Q: Can you tell me more about the ability to use Maxon Cinema 4D as a
standalone application?
A: By default, a trial version is installed. But I have cured it for you. When
you first launch the program, you will see the License Manager window with
an error message. Just close it. The program will automatically start again.
But already completely cured of greed! Let me clarify right away that this
is a version without RedShift. Also, you should know that the developers
have removed the Russian interface from Maxon Cinema 4D starting with the
2024 version of the line. So do not ask me for the absence of all this.
Content libraries are available for download at https://tinyurl.com/maxon4d
Q: What needs to be done to make it possible to work with libraries and other
online services?
A: To do this, you need to connect to the Adobe server with your ID
by selecting "Help-> Sign In" in the program menu and passing authorization.
I strongly recommend that you close the window in which you will be prompted
to run a trial version with a cross! In this case, in the future, you will
not encounter the problem of the appearance of an annoying message about the
end of the trial period! After restarting the program, online services will
become available.
Q: I cannot log in to the program. The authorization window behaves
incorrectly. What should I do?
A: Try closing the program and temporarily moving the folder C:\Program Files\
Common Files\Adobe\Adobe Desktop Common\NGL somewhere. After that, run the
program again and try to log in. Deleting this folder should initiate an
alternative authorization option - using a browser.
... CHECKSUMS ...
Adobe.After.Effects.2025.u1.Multilingual.iso
Image size: 3.63 GB (3,903,109,120 bytes)
Image SFV sum: F5C32904
Image MD5 sum: 92737F4A7D8A27688D538BB670BFCFFA
Image SHA1 sum: 370E2B6C0135A98B21BBCF375E3EB5A0B08F8640
... CHANGES ...
- The build is based on the standalone Adobe installer version 6.4.0.359, which
is not available to the general public.
- The Adobe Desktop Common module, which is mandatory to install by the original
installer, has been cut from the installer except for the required minimum.
- The Adobe Creative Cloud module, which is mandatory to install by the original
installer, has been completely cut from the installer.
- The installer provides a choice of installation path and interface language
for the program.
- During installation, a "video carousel" is launched in the installer window,
demonstrating the capabilities of the program.
- The ability to install the program on Windows 10 minor versions is unlocked.
- The main Adobe After Effects module has been updated to version 25.0.1.002.
- Spyware modules CRLog Transport Application and Adobe Crash Reporter Service
are disabled.
- The program has already been treated. After authorization, you can use
libraries and other online services.
- The Maxon Cinema 4D program included in the distribution has been disinfected.
Code:
https://rapidgator.net/file/58d96b14a4f4ac01c7d13d9aa7a02d77/Adobe.After.Effects.2025.25.0.1.2-m0nkrus.rar.html